05-06-2016 05:56 PM
...how does one force the flash to fire in the "P" setting in the XS530hs? I don't want the camera deciding when flash is necessary, I want it to flash every time I have it on "P" with the flash hood raised.
05-06-2016 06:18 PM
First I think you asked for the link to the user manual and I tried it it works:
http://www.camera-usermanual.com/manuals/canon/Canon_PowerShot_SX530_HS.pdf
On page 71 it tells you the flash settings I believe you want the "On" setiing. You haave to have the flash raised to access the settings first
05-06-2016 06:22 PM
Yes, that link works...and so does your solution for forcing the flash.
Thanks again.
Skip
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.