09-13-2016 01:59 PM
And it is very annoying. Is it possible to repair?
09-13-2016 02:14 PM - edited 09-14-2016 08:31 AM
One, most Powershot cameras [and similar ones by other manufacturers] are not easily disassembled for repair.
Two, even if it could be repaired, you could buy at least 2 used ones for the same cost to repair.
09-25-2016 11:29 AM
The ribbon cable which drives the stabilizer, broke down, teared.
I could manage to cut out the vertical coil, and shortened it, it will do. {no vertical stabilisation, and vertically loose lense, especially when hold upward or downward. And E23 errors, just as it has been.
Did not disassemble the optics, i guess the other end of the ribbon is soldered, and even the cable itself is not available for purchase.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.