08-29-2024 10:19 PM - last edited on 08-29-2024 11:19 PM by Tiffany
Hello, I recently started using my elph 170 is again. I accidentally changed the mode and now it seems to be stuck on auto and self timer and I can not get any other mode such as live. When I go to reset the camera settings it says busy. Is there a way to fix this issue? Thank you
08-30-2024 03:29 AM
Hi and welcome:
Since you have tried a reset and it hasn't worked out, I would suggest turning it off, remove the battery and card, and leave it for a day or so to let it go into deep discharge. Then put them back on and fire it up. If you get to a menu, then do the factory reset.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.