02-01-2018 07:52 PM
I own a G7X, I haven’t been able to focus on the Moon in Auto or Manual mode. What am I doing wrong? Thanks, HeraldoAZ87
Solved! Go to Solution.
02-04-2018 02:14 PM
A shining white ball could mean you are both OOF, and over exposed at the same time.
02-01-2018 10:19 PM
What do you mean that you cannot focus in manual mode? Can you focus on other things? My T6S has no problem autofocussing on the moon the other morning.
02-01-2018 11:34 PM
In manual mode I set the focus to infinity and all I got was Shining white ball out of focus.
02-02-2018 09:42 AM
Out of focus or over exposed? It is very easy to over-expose the moon. If you look at my blood moon photos, in the photos section I had to turn the exposure down 3-4 stops to keep from blowing the highlights.
02-02-2018 07:28 PM
Out of focus.
02-03-2018 07:21 PM
"Infinity" is often a range on these cameras, try to adjust it manually, especially if the lens was cold at night.
02-04-2018 02:14 PM
A shining white ball could mean you are both OOF, and over exposed at the same time.
02-01-2018 11:06 PM - edited 02-01-2018 11:08 PM
Hi!
I dont know a lot about your camera but for mine to do that, SX50HS, I had to first use a tripod and remote wired shutter switch because I was zooming in to about 100X, I had to adust or move the focus frame or brackets to an area on the moon with some contrast and detail after I framed my shot. I think you can also resize the focus frame to a smaller size. You should be able to get good shots with your camera. I use Program mode for my shots try that if you have it but it should work in Manual also.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.