01-23-2013 12:12 PM
I have a Canon MF8380 cdw. It is making a loud roaring noise when during printing. The image quality is not affected. It is less than 1 year old. Could the drum need cleaning? Is there a drive belt on this machine that could be slipping?
01-25-2013 09:08 PM
Hi nedbar,
I'm sorry to hear about the noise you are experiencing from your device. Please carefully check for any jammed paper or obstruction that may be causing the noise, and ensure the toner cartridges are seated properly.
If that doesn't resolve the issue, or if you need help with the procedures, it is recommended to discontinue use and contact our technical support group at 1-800 OK CANON (800-652-2666), 8A-8P EST, on Monday for further assistance.
09-18-2016 09:25 AM
I have had this same problem. It started within the first couple of weeks.
I have blown out the printer with compressed air... didn't help
Very annoying - seems to be just a bad quality issue.
12-10-2018 10:58 PM
My printer was fine for years, but in last few months, as it starts up to print a very loud slam or crunch.
HELP
12/18/2025: New firmware updates are available.
11/20/2025: New firmware updates are available.
EOS R5 Mark II - Version 1.2.0
PowerShot G7 X Mark III - Version 1.4.0
PowerShot SX740 HS - Version 1.0.2
10/15/2025: New firmware updates are available.
Speedlite EL-5 - Version 1.2.0
Speedlite EL-1 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.2.0
7/17/2025: New firmware updates are available.
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.