10-03-2017 10:41 AM
Hello,
I have a mf624cw multifunction laser. When scanning B&W documents to my computer, the documents appear very light and are impossible to read. How do I correct the default settings so that my documents appear darker, each time and every time?
Thank-you,
Steve
10-11-2017 11:42 AM
Hi into3d,
You can do the following by using ScanGear MF:
-Previewing the image before scanning
-Specifying the scanning area
-Adjusting the detailed image quality
-Configuring Scan Settings in Simple Mode
- Configuring Scan Settings in Advanced Mode
Click HERE for information on configuring Scan settings in Advanced Mode which should address the issue you have described.
Click HERE for general scanning instructions.
If you continue to have difficulties, please contact our support group using the following link:
http://Canon.us/ContactLI
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.