02-26-2024 01:56 PM - last edited on 02-27-2024 09:54 AM by Danny
I have just replaced genuin Canon 054 toner cartridges. Only mergenta color not printing or not working. All colors showing 100% in toner information. All other three colors Cyan, Yellow and Black are printing fine. what is the possible remedy for this issue.
Also , Printout are fading on right side.
02-26-2024 08:29 PM
Try removing the cartridge and rolling it around (one of the steps listed in the directions is to roll the cartridge before installing it into the printer).
If the old magenta cartridge is still available & has some life left in it, try putting it back into the unit and see if it prints out. If it does, then the replacement cartridge looks to be bad. 🤔
02-27-2024 12:11 PM
I have tried the old cartridge, it has left with 15%. Still not printing.
02-27-2024 12:13 PM
The printer is showing the toner % for both old and new cartridge. but not printing. All other cartridges are working fine.
02-27-2024 12:55 PM
Knowing that more than one magenta cartridge isn't supplying toner, but all other cartridges do, I would suggest reaching out to Canon Customer Support to have them do their diagnostics and, if necessary, discuss having the unit sent in for repair.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.