08-28-2024
05:54 PM
- last edited on
08-28-2024
06:00 PM
by
Tiffany
I have been deploying imageCLASS D1650's in a medical facility with currently about 4 out. The last one I put out, I got a report from the user they are having issues with printing from their medical software and they got a notification that the toner is at 20%, which was also affecting fax's. I resolved the error with the fax and those will now print with low toner, and printing from windows was working fine, but I am still having issues printing from the medical software. I've taken that toner and put it in another one of my printers and had a user attempt prints from the system. It only errors on the one system. The medical software support states they are getting their prints blocked.
Is there something else with the printer I should be looking for settings wise? They have all been set up the same so I don't know what could possibly causing a hiccup.
07/01/2024: New firmware updates are available.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.