06-11-2021 12:23 PM
Hello,
i bought a used canon ImagePress C700, it came with a fiery server E200-07 but the server has no hard drive. I therefore decided not to use the server but after a network configuration the printer does not print and when you plug in a USB cable it is not detected. I even made a configuration on CUPS on debian but still the same problem
I specify that I used the official driver and even completely reset the printer but impossible to print.
can you help me with this problem?
thank you
Solved! Go to Solution.
06-11-2021 01:15 PM
If you live outside the United States, please click HERE and select your country to find support in your part of the world.
Feel free to discuss Canon products sold outside of the United States, but please be aware that you will not receive support directly from Canon USA.
Thanks for choosing Canon!
06-11-2021 12:41 PM
06-11-2021 12:47 PM
Good evening Abel
thank you for your prompt support. I actually tried your suggestion but there is no support near my city (Niamey, Niger)
06-11-2021 01:15 PM
If you live outside the United States, please click HERE and select your country to find support in your part of the world.
Feel free to discuss Canon products sold outside of the United States, but please be aware that you will not receive support directly from Canon USA.
Thanks for choosing Canon!
06-11-2021 01:18 PM
thank you Abel
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.