01-02-2019 05:25 PM
Hello all, 1st post, be gentle pls & thx 😉
1stly, thx for reading my post. I am after a workaround for this seemingly simple problem, how to I get to a landscape letter paper size, so when I feed in a cut sheet of 8.5x11 in a landscape fashion, it will maximize my top to btm printing on my print?
To clarify, I need 10.75" image to fit on an 11" photo paper (to fit my frame). But because of the roller, I need to be able to feed the paper into the printer in a landscape fashion, so the roller is on the left side of the image, squeezing space on the side instead of top & bottom. The margin space for the roller shows up in the print preview (seemingly 20mm). Alas there is no landscape letter standard size. Anyone know of a work around? I've tried making a 11" x 8.5" custom size, but the canon software will not allow...which just plainly is shooting me in the foot. All I need is a Landscape Letter standard size! Is that too much to ask for? Seemingly that is the case right now... UGH!
01-30-2019 10:49 AM
Please try using the Free Layout tool to place your item as you wish it to print on the page.
For more information, please use the appropriate link below:
(Mac OS X) https://ugp01.c-ij.com/ij/webmanual/FreeLayout/M/1.0/EN/FLO/Top.html
For further assistance, it is recommended that you contact technical support via phone. There is NO charge for this call. Please dial 1-800-423-2366, Monday-Friday 8:00 am to 8:00 pm Eastern Time, excluding holidays..
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 220.127.116.11
PowerShot SX420 IS - Version 18.104.22.168
PowerShot 620 HS - Version 22.214.171.124
PowerShot SX720 HS - Version 126.96.36.199
PowerShot G1X Mark III - Version 188.8.131.52
PowerShot G7X Mark II - Version 184.108.40.206
PowerShot G9X Mark II - Version 220.127.116.11
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.