04-13-2022 09:50 AM
I've been testing the Canon Maxify GX6050 printer for use in a commercial setting where it needs to print roughly every 30 to 60 seconds while in use.
The quality and speed is really impressive, however it appears to run some kind of post-print process at between 25 and 30 seconds after every print, and it continues for around 40 seconds. Unfortunately this interferes with getting consistent prints out at a decent speed (it can double the print time to wait for whatever it is doing to complete or cancel then complete the next job). It's a shame because otherwise this printer seems perfect - and the ecotank will make it really economical.
I'm wondering what this post-print process is and if there's any way to stop it happening or delay it for 5 minutes? I've been through all of the menus both on the printer itself and through it's web UI but there's nothing other than auto power on which doesn't impact this behaviour.
Can anyone help?
04-13-2022 10:03 AM
Welcome to The Canon Community, and thank you for your inquiry!
We appreciate your participation; however, we need to let you know that the Canon Community is hosted and moderated within the United States by Canon USA. We can only provide support for Canon products manufactured for and used within the US market. The MAXIFY GX6050 isn't sold or supported by our team here at Canon USA.
If you live outside the United States, please CLICK HERE and select your country or region for your support needs.
You're welcome to discuss Canon products sold outside the United States, but please be aware that you will not receive support directly from Canon USA.
04-14-2022 05:31 AM
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 220.127.116.11
PowerShot SX420 IS - Version 18.104.22.168
PowerShot 620 HS - Version 22.214.171.124
PowerShot SX720 HS - Version 126.96.36.199
PowerShot G1X Mark III - Version 188.8.131.52
PowerShot G7X Mark II - Version 184.108.40.206
PowerShot G9X Mark II - Version 220.127.116.11
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.