08-02-2016 05:38 PM
We have a Canon ImageClass D1370. When printing it will say there is paper jam from the main drawer. When you open the drawer there really isn't a paperjam. The printer just isn't pulling the paper all the way through. Sometimes the paper it turned a little bit and sometimes it just looks like the paper was lifted and then nothing. Any suggestions on how to fix without having to call out for repairs?
08-04-2016 03:47 PM - edited 08-04-2016 03:47 PM
Hi CSmith.
I will be able to assist you.
Please verify that printer is sitting on a level surface, and also check that the paper guides inside the cassette tray are flush against the paper. If this issue persists, we will have to recommend that you call us at 1-800-OK-CANON (1-800-652-2666), for further assistance.
I understand that the forum may be your preferred method of communication; however, the next steps must be performed with a telephone support representative assisting you.
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 1.1.0.0
PowerShot SX420 IS - Version 1.1.0.0
PowerShot 620 HS - Version 1.1.0.0
PowerShot SX720 HS - Version 1.1.0.0
PowerShot G1X Mark III - Version 1.1.0.0
PowerShot G7X Mark II - Version 1.2.0.0
PowerShot G9X Mark II - Version 1.1.0.0
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!
EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STMCanon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.