12-02-2019 07:49 PM
This MF6422Cdw is a newly installed machine for my office. Every time we print we have to select on the machine the paper source as it gives an error of "Load Paper Drawer 1". There is paper in the tray, it is correctly identified I believe, so I'm not sure what this is about. Suggestions?
Solved! Go to Solution.
03-07-2023 11:28 AM
I am happy I brightened your day by sharing the solution. I know how stressful it can be!
04-25-2023 06:52 PM
I discovered after doing everything indicated that the problem was a piece of paper was in the multi-purpose tray. You can't see this unless you remove the tray. Once I removed the paper and re-inserted everything, the "load paper" error went away. This error shows up as the drawer and tray being "empty" on the remote UI. The paper would not print as long as it was in this state.
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.