12-12-2022 09:16 PM
Scan to email stopped working today on MF642C after firmware update from cannon. It used to work fine until this morning.
I had below gmail setting that was working
E-Mail/I-Fax Settings
SMTP Server: smtp.gmail.com
E-Mail Address: user@gmail.com
POP RX: Off
Authentication/Encryption Settings
POP Authentication Before Sending: Off
SMTP Authentication (SMTP AUTH): On
User Name: user@gmail.com
Password: Set.
Use TLS for SMTP: On
Verify Certificate: Off
Use TLS for POP: Off
And SMTP port is 587 under port number settings
It seems firmware messed up
12-12-2022 11:04 PM
Greetings,
Settings look good. Try with port 465 and see if that makes any difference.
~Rick
Bay Area - CA
~R5 C (1.0.7.1) ~RF Trinity, ~RF 100 Macro, ~RF 100~400, ~RF 100~500, +RF 1.4x TC, +Canon Control Ring, BG-R10, 430EX III-RT ~DxO PhotoLab Elite ~DaVinci Resolve ~Windows11 Pro ~ImageClass MF644Cdw/MF656Cdw ~Pixel 8
~CarePaks Are Worth It
12-13-2022 10:50 AM
I tried with port 465 but same error #752.
Is there any way to get back to previous firmware?
07/01/2024: New firmware updates are available.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.