Showing results for 
Show  only  | Search instead for 
Did you mean: 

Imageclass D530 printer issue


I have Imageclass D530 printer that stopped printing or scanning suddenly.  I think the USB2 port on the printer stopped working.  I thought it could be the cable so I bought a new cable and tried but same result.  I have tried with 3 laptops so far, all running Windows 8 patched up-to-date.  I have tried turning printer off/on, re-installing drivers, rebooting the laptops etc.   Only thing that works now on the printer is copier.   

I am seeking guidance on things I can try and also if there is a way to hard reset this printer.  

Thank you




The Imageclass D530 is an older model. I did a quick scan of the documents associated with the unit, but don't see any reference to defaulting it.

Try calling Canon Support @ (800) 652-2666.

If the USB port has gone bad, it wouldn't be cost effective to repair the unit. I'd suggest replacing it with one of Canon's current models. 🙂

Product Expert
Product Expert

Hello Rankam,

If the USB port on the printer is not responding, it will usually mean the printer needs service. To check for any available service options, you can log into your MyCanon account using the link HERE. To see if there are any troubleshooting steps that we can provide to address the issue please reply to this post with any specific erros you get on the computer when you try to use the D530 or connect it to your computer. Any extra details will help us check for any additional solutions.

12/08/2022: New firmware version is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
10/14/2022: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version is available for EOS-C500 Mark II
05/26/2022: New firmware version is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version is available for EOS R5 C
03/23/2022: New firmware version is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!