09-23-2020 02:32 PM
I recently switched over from Windows to an iMac running Catalina MacOS 10.15.6. I had no problem installing the drivers. My only issue is that I want to make one-sided printing the default on all my programs/apps. I don't want to have to go into Settings every time I go to print something and change it. How do I do that?
03-27-2022 02:19 PM
To fix this go to something you want to print. Then when printing, choose a print style→ Tap the “layout" drop down→ select “Finishing” make sure print style is 1-sided printing.
Dont print yet. Then go above where it says “Presets” and select “save current settings as preset”
Save Preset name to “One Sided” and make sure it has all printers selected.
Then print the page.
Make sure in the future that you have the “one sided" preset selected if you want to print one sided.
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 126.96.36.199
PowerShot SX420 IS - Version 188.8.131.52
PowerShot 620 HS - Version 184.108.40.206
PowerShot SX720 HS - Version 220.127.116.11
PowerShot G1X Mark III - Version 18.104.22.168
PowerShot G7X Mark II - Version 22.214.171.124
PowerShot G9X Mark II - Version 126.96.36.199
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.