01-31-2020 07:06 PM
New in the forum, thank you for allow me to be part of this. I bought this printer in November, Out of the box was deffective, had to call Canon, they send a Tech and some sensor for the ink was replaced. I can not print borderless in this printer, used 4 diferents type of papers,, 4 different softwares, change all posible setting to print borderless and on the left side there is always 2mm white line. Used 24 inch and 44 inch wide rolls. Any subjection. Spoke twice with canon support, the firs time I was told to buy canon paper, I did and the same results. the second time the person said that he will scalate the problem. Please any advised will be appreciate it. Thanks
Solved! Go to Solution.
07-30-2020 03:22 PM
rich-wang,
There are options for specifying both Simplified Chinese and Traditional Chinese languages in the Device Settings menu of the printers.
You can also view the online manual at the following link:
You can change the language of the manual using the drop down menu on the upper left area or the main page. Manuals for other models can be accessed by using the "Change Product" link at the top of the main page.
02-03-2020 03:22 PM
Hello.
Please review the topic in the manual that might help with this issue:
Borders appear in borderless printing
This didn't answer your question or issue? Find more help at Contact Us.
02-04-2020 07:31 PM
Hi Michael, thank you for take your time and respond my issue. I was on the phone with Canon suport for 1 and half hour and we followed all the different setting on the manual and nothing, still getting the 2mm white line on the left of my prints when I try to print borderless. Supposledly my case is been scalade but I have not heard nothing from Canon yet. Love the printer but I need to resolve that issue. Thank you again.
07-23-2020 11:45 PM
07-30-2020 03:22 PM
rich-wang,
There are options for specifying both Simplified Chinese and Traditional Chinese languages in the Device Settings menu of the printers.
You can also view the online manual at the following link:
You can change the language of the manual using the drop down menu on the upper left area or the main page. Manuals for other models can be accessed by using the "Change Product" link at the top of the main page.
07-31-2020 12:48 AM
Hi Michael~
Thank you!
It's very useful to me
but sorry!
I don't find any button as "Accept as Solution"
Can you guide me how to do it
07-31-2020 08:23 AM
Hi, rich-wang! We clicked it for you. Thanks for posting!
08-04-2020 08:51 PM
Ok,thank you very much!
07/01/2024: New firmware updates are available.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.