11-29-2021 04:28 PM
I have am ImageClass MF642Cdw. The prints are very bad. The color doesn't match and there are vertical streaks.
I cleaned the Fixing Assembly and ITB but there was no improvement in the printing quality. Is there any thing I can do to fix this? Thank you!
11-29-2021 10:31 PM
Other than the output itself as you point out, the frame of what was printed is different between the left and right images you posted. Is the right-hand side really cropped off like that? Is it somehow applying some scaling factor?
11-30-2021 11:45 AM
I placed the original image and a scanned print of it next to each other in photoshop to show the difference in color and the horizontal and virtical lines that appear after printing. So, the image is mostly "needs to be (left) vs. "printed result (right). There is no cropping issue. I just didn't do a precise enough job in the juxtaposition.
Do you have any idea of why the print is so bad? I tried different papers too.
12-02-2021 09:50 AM
Sorry, I do not. I was just thinking it may have been a scaling issue. Thanks for the clarification.
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.