cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Tips on Posting

canonusa
Administrator
Administrator

If this is your first time visiting our community, here are some simple tips to get started:

 

  • As a visitor, you will be able to view all discussions, look around, and search for information.  Explore Discussions & Help to find topic-specific discussion boards.
  • If you want to participate in our community, all you need to do is register.
  • To search for a topic, use the search bar at the top of any page. To narrow your search, use the search bar on the discussion board specific to the topic you want to find. 
  • To ask a question to the community, type your question on the main page on the appropriate discussion board.  If you are unable to find the specific topic related to your question, use the General Discussion board.


When participating in our community, be mindful of these important rules of conduct:

 

  • Be respectful. Respect people's time and attention by asking well-thought-out questions. Respect people as individuals by keeping your tone positive and your comments constructive.
  • Be relevant. Make sure your contributions are relevant to the spirit of the discussion style and topic where you post. Please do not post duplicate messages in different areas, which creates fragmented discussions. If you have a new question, start a new thread rather than interrupting a topical conversation.
  • Protect your privacy – yours and others. Don't share anything about yourself that you would not want shared publicly. Our community is a public domain after all.
  • Remember, this is user generated content. You'll find plenty of good advice here, but remember that your situation, configuration, or implementation may vary from that of the individual sharing a solution. Apply the same good judgment here that you would apply to information anywhere on the Internet.

 

For Immediate Response From Canon USA:

We value our customers and want to make sure we address your needs in the best way possible. If you have an inquiry requiring immediate attention from Canon USA’s customer support team for a product manufactured for the United States market, please check our website for support options available: www.usa.canon.com/support.

0 REPLIES 0
Announcements
03/14/2023: New firmware version 1.8.1 is available for EOS R6

03/02/2023: New Firmware Updates Are Available:

EOS R7 - Version 1.3.0EOS R10 - Version 1.3.0
02/24/2023: We've updated Share Your Photos

2/07/2023: New product announcements!

EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.