10-25-2021 03:23 PM
I have two DR-G2110 scanners with issues. One has a screetching/grinding sound coming from the top end when in operation. I've replaced the roller kit and cleaned every roller with rubber rejuvenator but the upper unit still makes this loud noise. Is there anything else I can do before shipping this off to a repair facility?
My second DR-G2110 scanner will not scan properly as the pages are shifted to the right about one inch. I've ensured the rollers are cleaned properly, the settings reviewed, and reset the feeder guides as instructed. The pages appear to be feeding in straight. Any idea how to correct this?
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.