02-24-2019 01:09 PM
I just purchased probably my fifth Canon MP25DV over the last few years and this one is emitting a almost constant high pitch noise which is very annoying. None of my other adding machines have ever done this. It's going back to Staples tomorrow. Has anyone else had an adding machine that has done this?
I thought I could live with it but it is driving me crazy!
03-22-2019 01:28 PM
02-24-2022 08:25 PM
It didn't make that maddening sound for more than a year after purchase. I originally thought I had tinnitus and thought I was going crazy. It wasn't until I had a co-worker come over and help me figure out the sound that I discovered it was the calculator in sleep mode.
09-24-2021 10:59 AM
This is my favorite calculator and have used this model for years! I am returning this new one TODAY because of the high pitch noise it emits when it goes into sleep mode. 1st I do not need a 7 minute sleep mode setting. I get interrupted constantly and this is a total PAIN!
02-24-2022 08:23 PM
Completely agree. Love the touch of this model but the sleep mode is unneeded. Worse yet, is that the sleep mode activates the high pitch squealing sound that's loud enough to drive one mad. It didn't make this sound for about a year plus after purchase so it's past warranty.
05-19-2023 03:03 PM
I have Canon MP11DX and this is my 4th one like this. I love this machine, however, this high pitched squeel has got to go or the Canon is out of here. Mine is past warranty too. If I can't get an answer and solution to this problem, the next time I'm out, I'm getting another brand.
05-20-2023 07:08 AM
I'm sorry to hear about the issue you're experiencing with your new Canon MP25DV. It's not a common problem, but it does sound very frustrating.
The high pitched noise could be due to a variety of factors, including an electrical issue or a mechanical problem within the device. Here are a few troubleshooting steps you can try before returning it to Staples:
Power Cycle the Adding Machine: Unplug the machine, wait for a couple of minutes, then plug it back in. Sometimes a simple power cycle can resolve minor electronic glitches.
Inspect for Visible Damages: Ensure there's no visible damage to the adding machine that may cause the noise, such as a loose part.
Check the Power Supply: The noise could potentially be caused by an issue with your electrical supply. Try using the machine in a different location or on a different power strip to rule out this possibility.
05-22-2023 12:24 PM
I have tried all of your ideas and I get no changes. It's a malfunction in the calculator no doubt. I say this because I can turn it off, it still has the high pitched sound. However, when I turn it on to the first right, it stops. I can then turn it all the way to print and within 10 minutes we've got the whistle again. It's getting on my nerves and I can't keep turning it on and off every 10 minutes. This is the 3rd one I've had that does this and unless you can give me a solution, I'm going to try another brand.
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 184.108.40.206
PowerShot SX420 IS - Version 220.127.116.11
PowerShot 620 HS - Version 18.104.22.168
PowerShot SX720 HS - Version 22.214.171.124
PowerShot G1X Mark III - Version 126.96.36.199
PowerShot G7X Mark II - Version 188.8.131.52
PowerShot G9X Mark II - Version 184.108.40.206
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.