02-08-2013 11:24 PM
How do I get the info on the screen to dissapear so it only shows the picture?
I want to record to my avermedia ez recorder plus so I can record longer than 12 mins, also, where can I find hd component cables for the t3i?
02-11-2013 06:35 AM
Timmyg1978,
When you are viewing an image on the LCD, to change what information is displayed all you will need to do is press the <INFO> button.
In regards to using an external recorder, when the camera is in the process of recording or sitting idle, the signal coming out of the camera is not the same as what the final recorded video will be. In order to get full HD video to the recorder, it must be recorded with the camera first, then played back into the recorder. The limit will still be about 12 minutes of video.
Also, the EOS Rebel T3i does not have HD component outputs. It outputs HD video via HDMI.
If this is a time sensitive-matter, additional support options are available at Contact Us.
01/20/2026: New firmware updates are available.
11/20/2025: New firmware updates are available.
EOS R5 Mark II - Version 1.2.0
PowerShot G7 X Mark III - Version 1.4.0
PowerShot SX740 HS - Version 1.0.2
10/15/2025: New firmware updates are available.
Speedlite EL-5 - Version 1.2.0
Speedlite EL-1 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.2.0
7/17/2025: New firmware updates are available.
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.