cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

the ruuber in my canon 7d is sticking off

castillomiami
Contributor

hi i have a question in my 7 d  in the corner close to the shotter bottom the cover is sticking off does anyone know how to fix

it? thanksphoto-2.JPG

1 ACCEPTED SOLUTION

Tim
Authority

Dear Castillomiami ,

 

I am sorry to see that the grip has started to come off your EOS 7D.  I recommend sending this to the Factory for a proper evaluation.  I cannot recommend you use adhesives of any kind to re-attach the grip. 

To start your repair process, you'll need to complete a repair request on our web site.

http://www.usa.canon.com/cusa/online_repair_tracking/consumer/eos_slr_camera_systems/eos_digital_slr...

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

View solution in original post

4 REPLIES 4

jfo
Rising Star
My T2i started doing something similar after over a year of heavy use. I applied super glue to bond it back into place.

thanks  JFO i was thiking on  that before but i'm no sure is use super glue or the other y glue call  silicone Aquarium Sealant  Can be used for patching tubes and hoses and attaching plastic, but if you use super glue and work for you  i goning to do that too  thanks  

 

Tim
Authority

Dear Castillomiami ,

 

I am sorry to see that the grip has started to come off your EOS 7D.  I recommend sending this to the Factory for a proper evaluation.  I cannot recommend you use adhesives of any kind to re-attach the grip. 

To start your repair process, you'll need to complete a repair request on our web site.

http://www.usa.canon.com/cusa/online_repair_tracking/consumer/eos_slr_camera_systems/eos_digital_slr...

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

I use loctite super glue. Works really good.

Announcements
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
10/14/2022: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
09/19/2022: New firmware version 1.0.4.1 is available for EOS C70
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!