03-16-2017 10:12 AM
Hello, I bought my new Rebel T6i with an external flash (Vivitar 3000), but it doesn't flash when I take a picture.
Is there anyone who can help?
Thanks a lot!
Silke
Solved! Go to Solution.
03-16-2017 10:53 AM
You have to make sure to set the flash mode on the camera to manual instead of TTL.
I also suggest using manual exposure with the shutter set to the max sync speed and Aperture adjusted for exposure. You cannot use any of the automated exposure modes.
03-16-2017 10:40 AM
Probably not.
It can be tricky to get non-Canon flashes to work.
What exact model of flash do you have?
Are you using it on camera or off camera?
03-16-2017 10:46 AM - edited 03-16-2017 10:47 AM
It's the VIV -SF-3000.
I am using it on camera.
03-16-2017 10:53 AM
You have to make sure to set the flash mode on the camera to manual instead of TTL.
I also suggest using manual exposure with the shutter set to the max sync speed and Aperture adjusted for exposure. You cannot use any of the automated exposure modes.
03-16-2017 10:57 AM
Thank you very much, kvbarkley!
I'll give it another try!
Have a great day!
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.