11-17-2012 11:24 PM
I have canon 5d Mk II ...and suddenly appears Err 30 on display......anybody can help w' this problem, thx
10-28-2016 04:59 PM
B from B
"Did I say that there would be?"
No sir you did not. But the solution is simply. Avoid changing the lens when the sand is blowing or bring along a changing bag.
10-28-2016 05:28 PM
@RobertTheFat wrote:
@kvbarkley wrote:Why would there be more blown sand in Turkey, than say Arizona or New Mexico?
Did I say that there would be?
"The fact that you had your camera repaired in Turkey suggests that you live in the Middle East, a very challenging environment because of the prevalence of windblown sand."
10-28-2016 06:25 PM
@kvbarkley wrote:
@RobertTheFat wrote:
@kvbarkley wrote:Why would there be more blown sand in Turkey, than say Arizona or New Mexico?
Did I say that there would be?
"The fact that you had your camera repaired in Turkey suggests that you live in the Middle East, a very challenging environment because of the prevalence of windblown sand."
What exactly are you trying to prove here? I didn't say anything to suggest that Arizona and New Mexico don't have as much of a problem with windblown sand as the Middle East does. Frankly, I don't know whether they do or don't. All I said was that the OP may need to get his camera cleaned more often than those of us who live in a less challenging environment. FWIW, I can assure youo that windblown sand is not a significant problem where I live. And everything I've read suggests that in the Middle East it very well can be.
10-29-2016 02:25 AM
10-29-2016 02:29 AM
10-29-2016 02:59 AM
10-29-2016 09:03 AM
@Natursuntur wrote:
It is serviced by an authorized vendor. However, there is only one vendor, which is also the distributor in Turkey.
It's really peculiar chance, or extraordinary coincidence. A human explanation just seems far more likely.
10-29-2016 10:10 AM
"A human explanation just seems far more likely."
Whether it be the service center or the operator!
10-29-2016 11:09 AM
@ebiggs1 wrote:"A human explanation just seems far more likely."
Whether it be the service center or the operator!
The treatment of his camera described by the OP is that of a careful user. So if he goes through three shutters in a couple of years, it's hard to see how it's operator error.
10-29-2016 12:21 PM
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.