07-22-2024
07:14 AM
- last edited on
07-23-2024
09:25 AM
by
Danny
I need to film in time lapse a building project starting early in the day, The problem I had is the exposure seems to be set firmly at the start and does not adjust as the daylight increases therefore after about 3 hours it is totally over exposed to the point of white out. How can I make the expose track the light ?
07-22-2024 09:07 AM - edited 07-22-2024 09:09 AM
Try this video: https://www.youtube.com/watch?v=mByq7Vn4oEQ
07-30-2024 08:45 AM
This does not work in video mode so no help for my problem
07-30-2024 08:50 AM
Canon Knowledge Base - Shooting Time-lapse Movies (EOS 5D Mark IV)
07-30-2024 10:23 AM
It seems it is not possible to have the exposure change during Time Lapse on this Camera. The Canon Knowledge Base says:- The exposure setting for the first shot will be applied to subsequent shots. so I will have to re-think what to do.
07-30-2024 09:22 AM
Just take a bunch of images and make a movie when you are done.
07/01/2024: New firmware updates are available.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.