06-18-2020 01:23 PM
The filename prefix my camera (Rebel T1i) started storing the images on my SD cards with the following naming convention: _MG_nnnn instead of IMG_nnnn. I can't find where this convention is set. Can anyone help?
Solved! Go to Solution.
06-18-2020 02:47 PM
Check your Color Space. The camera should only do that when it is in Adobe Space, instead of the default Standard Space.
06-18-2020 02:47 PM
Check your Color Space. The camera should only do that when it is in Adobe Space, instead of the default Standard Space.
06-18-2020 03:22 PM
Totally agree with the above comment PLUS unless you shoot in RAW & have a monitor that can properly produce the Adobe Colour Space it's a bad idea to use it.
06-18-2020 05:20 PM
That did the trick. I am not sure how I even changed that setting. It was not intentional. I hope it does not screw up the images that were taken with the setting that way. I have not tried post-processing them in any way and they seem OK otherwise.
But Thank you very much! I appreciate the response.
ME
06-18-2020 05:45 PM
Usually the colours will be a bit flatter than when in the regular RGB colour space. You can fix that with a bit of editing.
11/20/2025: New firmware updates are available.
EOS R6 Mark III - Version 1.0.1
EOS R5 Mark II - Version 1.2.0
PowerShot G7 X Mark III - Version 1.4.0
PowerShot SX740 HS - Version 1.0.2
10/15/2025: New firmware updates are available.
Speedlite EL-5 - Version 1.2.0
Speedlite EL-1 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.2.0
07/24/2025: New firmware updates are available.
07/23/2025: New firmware updates are available.
7/17/2025: New firmware updates are available.
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.