TROUBLE Shooting Video

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
02-19-2019 09:24 AM
Hi,
My camera is a Canon M3 and recently it keeps stopping half way when shooting videos. It will show a bar at the side and when it stops, it will have 'busy' writen for a long time. HELP ME. ;(

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
02-19-2019 09:43 AM
It sounds very much like a slow memory card, what type of card are you using ?

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
02-19-2019 06:46 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
02-19-2019 09:38 PM
@everlynkee wrote:
Hi. I use the SanDisk memory card I think a 34 GB . I’ve tried formatting the memory card but it still didn’t work
I guess you might mean 64GB. You need to make sure that you are using a UHS-I SD card. Most 64GB cards are UHS-II, which are not compatible with most Canon cameras.
"Enjoying photography since 1972."

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
02-20-2019 06:34 AM
Yep, it's the UHS-I SD card. what else can I do?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
02-20-2019 06:49 AM
Try another memory card, make sure it is one purchased from a reputable supplier. There are a lot of mis-labelled fake cards around, these are mostly purchased online.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
02-20-2019 04:54 PM
You want a card with a U3 or V30 or higher rating.
SDHC cards go up to 32GB.
SDXC cards are 64GB or larger.
Here’s a a good one.
Conway, NH
1D X Mark III, M200, Many lenses, Pixma PRO-100, Pixma TR8620a, Lr Classic
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
02-21-2019 01:09 PM
Since no one's asked yet, are you using a full size SD card or a micro SD card with an adapter?

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
02-24-2019 01:57 AM
I use this SD card
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
02-24-2019 05:10 AM
From the manual:
1920 x 1080 (29.97 fps/23.98 fps/25.00 fps😞 172.6 MB/min.1280 x 720 (59.94 fps/50.00 fps😞 115.4 MB/min.640 x 480 (29.97 fps/25.00 fps😞 22.4 MB/min
173/60 = 2,88 MB/s.
Your card has 10MB/s as lowest write speed. It should work fine if it isn't broken. Have you also tried to Low level format the card? From the manual page 138:
Perform low-level formatting in the following cases: [Memory card error] is displayed, the camera is not working correctly, card image reading/writing is slower, continuous shooting is slower, or movie recording suddenly stops. Low-level formatting erases all data on a memory card. Before low-level formatting, copy images on the memory card to a computer, or take other steps to back them up.
