08-30-2018 03:49 AM - edited 08-30-2018 03:49 AM
T6 1300D
I'm using EOS Utility to shoot video remotely, I don't want the LCD screen on while I'm doing this because it's just a waste of battery since I'm looking at my monitor and not the camera screen. I've been googling for like half an hour now and haven't found any other post regarding this issue, am I blind? Why would the LCD need to be on when you're shooting remotely and have a live feed with all the controls there? I've tried the DISP button, I've looked all through the menu settings, in EOS Utility I unchecked the "turn on camera lcd in live view" setting and it did nothing. Suggestions?
Best thing I can do so far is just bring the brightness all the way down on the screen but even then it's still going to be an unnecessary drain on battery I could be using for shooting. Seems like something really simple either I'm blind or this is a big design flaw for me.
08-30-2018 05:39 AM
I did not think it was possible to shoot video remotely using the EOS Utility, or another application.
As for the LCD, whenever you plug something into the camera’s HDMI port, this disables the LCD and reroutes the video signal to the HDMI port.
08-30-2018 08:30 AM
Brilliant! haha. Just cut the end off an HDMI and plug it in that could be a solution. Would not have thought of that
08-30-2018 08:32 AM - edited 08-30-2018 08:34 AM
And yeah using the EOS Utility 3, go to remote shooting > live view
Then with the camera in video mode you can live monitor while filming, as well as control of every exposure parameter/focus all from your computer
07/01/2024: New firmware updates are available.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.