cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

T3i stopped working.

jonchamberlin
Apprentice

I have a new T3i (~200 images, bought in November) that stopped functioning properly today.

I was taking pictures outside in bright sunlight. My 55mm was attached and I changed lenses to the 100mm macro. The camera was on during the switch, which i've never done - i always turn it off first. Once the macro was attached i clicked the live mode to exit the setting screen on the LCD and view the scene live. At this point nothing happened. The setting screen stayed.

With no luck, I attempted to turn the camera off and turn it back on, but this only resulted in the camera not turning on. It is a brick at this moment. 

I checked the battery level a minute or two before this happened. it was full.      

Any thoughts? Thank you

2 REPLIES 2

diverhank
Authority

I'd try :

1. Turn switch off

2. Remove lens

3. Remove battery

4. Press and hold shutter button (to deplete capacitance charge within camera)

5. Wait at least 20 seconds

6. Replace battery.

7. Power on and see if it powers up.

8. If not, remove battery.  Look within battery compartment, there should be a small access door, remove the date battery within that.

9. Repeat steps 1 through 7.

 

I've absently minded changed lenses and removed memory cards while the camera was on numerous times without any problems...very strange what you've run into. Good luck.

================================================
Diverhank's photos on Flickr

ebiggs1
Legend

What 55mm lens are you talking about?

Do you mean you changed lenses with the camera still in live view?   This may not be a good thing? I've never done that but I don't use live view!

Just leaving the camea on has no effect on lens swapping.

 

I do think the removing all batteries is a good idea but yoiu need way, way more than 20 seconds. This may reset the camera and well worth a try. I don't now how much, if anything, pressing the shutter button does. Although it seems to have some merit and following from people on the net. Can't hurt, I guess. But leave the batteries out for hours, not just 20 seconds.

 

While all the batteries are out of the camera, recharge them. Even if you think it is already charged.

EB
EOS 1DX and 1D Mk IV and several lenses!
Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.