cancel
Showing results for 
Search instead for 
Did you mean: 

Strange problem with Record Func. Rec. separately

pcather
Contributor

On my 5D Mark IV, I set my Record Function to Rec Separately.  Then I go to Image quality and set my CF to Raw and my SD to JPG Medium Fine. 

 

If I turn off my camera without removing either card and then turn it back on, the Image quality on both cards are now set to JPG Large fine. 

 

I have repeated this over and over to make sure it is really doing this.  Yet, I've had 2 people to do this on their own 5D Mark IVs and they say that when they turn theirs back on, the settings are still CF - Raw and SD - JPG Medium Fine.  

 

Please help me figure out what I'm doing wrong.  I use the above settings when I tether to Lightroom.  If I set up early for my client, before I begin the session I have to remember to reset the image qualities when I turn the camera back on. 

 

Early yesterday morning I grabbed my camera because there were 3 swans on the lake.  I forgot that I had a tethered session the day before.  It was early so I totally forgot to reset the the image quality.  All of my images were jpgs.  So sad...

 

Any advice would be so appreciated.

Pamela

 

 

2 REPLIES 2

jrhoffman75
Legend

Give Canon a call at 1-800-OK-CANON

John Hoffman
Conway, NH

1D X Mark III, Many lenses, Pixma PRO-100, Pixma TR8620a, LR Classic

Thanks
Announcements
09/19/2022: New firmware version 1.0.4.1 is available for EOS C70
08/31/2022: New firmware version 1.1.1 is available forRF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!