cancel
Showing results for 
Search instead for 
Did you mean: 

Rebel XS

JillF
Apprentice

I have a Rebel XS bought in 2008.  When I try to take a picture, I get an ERR 99 message "Shooting is not possible, Remove and reinstall battery or turn off and on again. "  I bought a new battery and get the same message. The message comes up on all lenses.  Anyone have any idea what is wrong? Thank you for any help. 

5 REPLIES 5

diverhank
Authority

Error 99, from what I read, is a generic error (undefined) that could be caused by a number of reasons...

 

1. Lens problem - most likely not because you tried different lenses

2. Dirty lens/camera contacts - try cleaning the gold contacts (gentle rubbing with an eraser is the stated method)

3. Bad memory card - try installing different cards

4. Bad battery (including non-Canon batteries) - try a different battery

5. Exposure counter overflow - try resetting the exposure count (---> auto-reset)

6. Bad external flashes or stuck built-in flash

7. Internal circuit failures - out of luck if this is the case.

 

I'd first remove the battery and try to press the shutter button to deplete the remaining capacitance charge in the camera.  Leave it alone for half an hour then try installing a good fresh battery.  Go through the process of elimination.

 

Look at the bright side...here is a perfect excuse to get a newer better camera if none of the trying works :).  Good luck.

================================================
Diverhank's photos on Flickr

Thank you! I will get to work on this list.

ebiggs1
Legend

Error 99 is really a bad deal. Sorry.  If the new battery and/or CF card didn't fix it, I doubt any of the other suggestions will either.

You might try a different lens since it is easy. 

You might try prying up (fingernail only) on the flash door while you turn it on. <----might have a chance to work! Smiley Happy

 

The Canon XS is not a good candidate for repair, IMHO, of course.

EB
EOS 1DX and 1D Mk IV and several lenses!

Any chance it could be a dead date/time battery? IIRC, in the early days even low-end Rebels had actual removable date/time batteries, rather than just a couple of extra built-in capacitors. If that were the problem, I might have expected a more informative error message, but you never know.

Bob
Philadelphia, Pennsylvania USA

"Any chance it could be a dead date/time battery?"

 

No.

 

The camera does not need that battery to operate.  It will work with or with out it.

EB
EOS 1DX and 1D Mk IV and several lenses!
Announcements

08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/30/2022: Service Notice: EOS 70D: Error 70 or Error 80
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!
12/7/2021: New firmware version 1.3.0 is available for Mount Adapter EF-EOS R 0.71x