08-30-2018 01:55 PM
I'm getting the following reading when I turn my Rebel T3i camera on: "Card's write protect switch is set to lock." This is incorrect. I've successfully used the same card in other Canon cameras as well as trying other cards in the T3i. It is definitely a camera issue. Is there anything I can do to rectify this problem and make the camera usable again? I'm the yearbook advisor at a small school and we can't really afford to buy a new camera. Really need to make this one function again. Thanks in advance.
08-31-2018 10:22 AM
One caveat, Canon may not service the T3i any longer.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.