cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Preview screen (remote trigger)

wildwoodphoto
Enthusiast

I’m using a remote trigger via the shutter release port. After image capture, the LCD screen only shows the horizon level indicator, but no preview of the taken image. The only way I can see the image I’ve taken is to unplug the cable to the remote trigger. How can I see the image preview without having to do this after every capture? I'm using an EOS 5D MkIV.

2 ACCEPTED SOLUTIONS

Flash out is to trigger a flash, not the camera.

 

You need a remote shutter trigger, not a flash trigger. I hope you have not damaged your camera.

View solution in original post

You won't know whether anything is damaged until you plug in a real remote shutter release.

View solution in original post

12 REPLIES 12

Just plugged in the RS-80N3 and all works OK

kvbarkley
VIP

What is your review time set to?

8 seconds.

Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.