03-29-2016 07:49 AM
My camera's flash won't pop up when I'm using it. It's saying error my built in flash could not be raised. How can I fix it?
Solved! Go to Solution.
03-29-2016 09:24 AM
It is probably dirty. When it tries to pop up you can 'help' it. Try to get your finger nail under the crack where it parts and help it pop up. If you succeed get a q-tip and some alcohol (a tiny amount) and clean the flash linkage.
Otherwise call Canon Service and they will do it for you.
03-29-2016 09:24 AM
It is probably dirty. When it tries to pop up you can 'help' it. Try to get your finger nail under the crack where it parts and help it pop up. If you succeed get a q-tip and some alcohol (a tiny amount) and clean the flash linkage.
Otherwise call Canon Service and they will do it for you.
12/18/2025: New firmware updates are available.
11/20/2025: New firmware updates are available.
EOS R5 Mark II - Version 1.2.0
PowerShot G7 X Mark III - Version 1.4.0
PowerShot SX740 HS - Version 1.0.2
10/15/2025: New firmware updates are available.
Speedlite EL-5 - Version 1.2.0
Speedlite EL-1 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.2.0
7/17/2025: New firmware updates are available.
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.