05-10-2016 09:46 AM
After many years fault free my 350D now shows ERR 02 on start up and won;t open up at all to shoot or view find. Battery is in and charged and so is the memory card - any ideas anyone? Many thanks - John
05-10-2016 10:05 AM - edited 05-11-2016 05:02 AM
Well, between the card and the camera, one of them has failed. Try a new card, and hope for the best. If the camera has failed, the cost to repair may well exceed the cost of a new camera.
05-10-2016 10:08 AM
Too bad that they don't make a little contact cleaner in the SD form factor. That might cure a lot of the ERR 02's we see.
05-10-2016 10:21 AM
05-10-2016 10:27 AM
You really can't on SD card connections, hence my idea.
05-10-2016 10:31 AM
05-10-2016 02:21 PM
Google "Laserline Clear Connections 4-in-1 Memory Card Slot Cleaner"
05-10-2016 02:41 PM - edited 05-10-2016 02:42 PM
Thanks for that.
Darn, there goes my idea to make a million bucks.
Should we recommend these for non-CF Card ERR 02?
Worth a shot.
05-11-2016 03:40 AM
And my 10% for giving you then opportunity to think of it! Somebody always rains on the parade!! Thanks for the comments everybody, I'll crack on and see if I can get it working otherwise it's the recycling bin! Cheers from a very wet UK.
05-11-2016 03:42 AM
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.