02-09-2021 11:03 PM - edited 02-09-2021 11:20 PM
So I keep having this issue where I'm in the middle of working maybe 30 seconds - 1 minute into the video and it cuts out closing the mirror leaving me with a black screen saying "Press <(camera icon)> button to activate movie shooting".
Camera was recently purchased brand new in Dec 2020 so its not a second hand camera.
I am using a vintage Pentax lens with a pentax K to EF adaptor. This is the adaptor being used. HERE
Also using the SD card that came bundled with the camera which on the label is a SanDisk Ultra rated at 90MB/s SDHC I U1 (10) 32GB
And yes I have formated my card in the camera.
02-10-2021 12:03 AM - edited 02-10-2021 12:04 AM
Do you have a Canon lens to try?
02-10-2021 04:48 AM - last edited on 02-10-2021 08:19 AM by Danny
Hi there,
In order to check if its a matter of the SD card not writing fast enough I would suggest setting the movie resolution lower to 720p and seeing if that allows you to record longer. If it does then a card with a higher write speed would be recommended.
02-10-2021 10:48 AM
So with the vintage lens and adapter still on the camera I tested it with res of 640x480 to see if its the SD card and still cut out..
So I went ahead and remove the vintage lens and attached the canon lens that came with it and worked perfectly (aside that the canon lens auto focus is damaged) so I went ahead and reinstalled the vintage lens and it worked perfectly. So now I'm thinking maybe it was bugging/glitching out and the canon lens reset the bug/glitch. So weird though.
02-10-2021 10:59 AM
Good, I am glad you solved your problem, just keep the Canon lens in your bag. 8^)
BTW, if this is the kit 18-55 with bad AF, it can sometimes be popped back into place.
https://community.usa.canon.com/t5/Lenses/Autofocus-not-working-18-55mm-lens/td-p/138114
(note that the solution came from a Canon employee)
02-10-2021 11:30 AM
Yes the kit 18-55 lens but its my fault since the lens was dropped and I opened it up and found one of the little gears are halfway stripped. so if I ever find a cheap parts only lens I'll replace the 1 stripped gear.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.