08-09-2014 02:04 PM
HI !!! FOR ALL I NEED HELP
MY CAMERA CANON EOS REBEL T4I, HAVE A PROBLEM, MESSAGE OUT, NO ACCESS CARD, OR CHANGE REINSERT or format CARD WITH THE CAMERA
08-10-2014 09:09 AM - edited 08-10-2014 09:09 AM
08-10-2014 09:50 AM
I am going to venture a guess. You set something to a setting that should not be!
I don't know just guessing. But at any rate reset the camera to factory and all is likely to be well.
08-11-2014 12:06 PM - edited 08-11-2014 12:07 PM
Sounds like an error 02.* You just need to take the card out and reinsert it. If that doesn't work, try inserting a different card. Make certain that all the images you want are saved to a different location, then reformat the card.
Good luck.
* The err 02 message reads, "Card cannot be accessed. Reinsert/change card or format card with camera."
03/02/2023: New Firmware Updates Are Available:
EOS R7 - Version 1.3.0EOS R10 - Version 1.3.02/07/2023: New product announcements!
EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STMCanon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.