Canon Community

ALEJANDROMASTA · ‎08-09-2014

HI !!! FOR ALL I NEED HELP

MY CAMERA CANON EOS REBEL T4I, HAVE A PROBLEM, MESSAGE OUT, NO ACCESS CARD, OR CHANGE REINSERT or format CARD WITH THE CAMERA

ScottyP · ‎08-10-2014

PERHAPS THERE IS A BUTTON STUCK ON THE CAMERA, JUST AS "CAPS LOCK" APPEARS TO BE STUCK ON YOUR COMPUTER. 😉

Scott

Canon 5d mk 4, Canon 6D, EF 70-200mm L f/2.8 IS mk2; EF 16-35 f/2.8 L mk. III; Sigma 35mm f/1.4 "Art" EF 100mm f/2.8L Macro; EF 85mm f/1.8; EF 1.4x extender mk. 3; EF 24-105 f/4 L; EF-S 17-55mm f/2.8 IS; 3x Phottix Mitros+ speedlites

Why do so many people say "FER-tographer"? Do they take "fertographs"?

ebiggs1 · ‎08-10-2014

I am going to venture a guess. You set something to a setting that should not be!

I don't know just guessing. But at any rate reset the camera to factory and all is likely to be well.

EB
EOS 1D, EOS 1D MK IIn, EOS 1D MK III, EOS 1Ds MK III, EOS 1D MK IV and EOS 1DX and many lenses.

cale_kat · ‎08-11-2014

Sounds like an error 02.* You just need to take the card out and reinsert it. If that doesn't work, try inserting a different card. Make certain that all the images you want are saved to a different location, then reformat the card.

Good luck.

* The err 02 message reads, "Card cannot be accessed. Reinsert/change card or format card with camera."

Canon Community

MYCAMERACANONEOSREBELT4I,HAVEAPROBLEM,MESSAGEOUT, ​NOACCESSCARD,ORCHANGEREINSERTorCARDWITHTHECAM

MYCAMERACANONEOSREBELT4I,HAVEAPROBLEM,MESSAGEOUT, NOACCESSCARD,ORCHANGEREINSERTorCARDWITHTHECAM