04-14-2020 07:11 AM - edited 04-14-2020 07:14 AM
I have an EOS Rebel Xsi, and I want to use it as a Webcam in conjunction with OBS.
I am unable to remove the AF point rectangular in Remote-Live Window EOS Utility 2 for my Canon EOS Rebel Xsi What can the problem be? When I push the button to turn the rectangular off, nothing happens. The square figure feeds through to the OBS image during web streaming. Is there any solution. I have updated the firmware on my camera and ensured that I have the latest software.
The camera functions very well as a Webcam in all other respects.
Can anybody help?
04-14-2020 07:23 AM
Maybe switch to manual focus?
04-14-2020 07:34 AM
I tried that as well. No success.
In addition, the list box and on/off buttons in the Focus window are disabled and I could not trace any setting to enable it.
04-14-2020 07:38 AM
Verify that you have the latest version of EOSU installed.
04-14-2020 07:39 AM
Thank you - will try that.
04-14-2020 07:59 AM
I have just installed EOS Utility 3.10 Dated 29 Jan 2019 Issue Number 0200580002, which is, as far as I can establish, the most recent update. The problem was not resolved.
04-14-2020 08:28 AM
Give Canon a call at 1-800-OK-CANON
04-14-2020 09:07 AM
Thank you very much. Will do so.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.