06-05-2023
06:34 AM
- last edited on
06-06-2023
08:58 AM
by
Danny
A line shows up on footage and images I take with my R6 mark 2. I think it stars showing up after I've used the camera for a bit and it warms up. I've updated the firmware to the latest hoping it will help fix it, but it still shows after a while. I am extremely concerned as this might mean I can't use my camera for longer shoots. Anybody know a way to help please?
06-05-2023 09:41 AM
Sounds like a hardware failure with the sensor. Especially since the fault shows up after the camera has been on for a bit and the images also show the line.
Assuming your camera is still under warranty? Contact Canon to see about performing a repair.
06-05-2023 01:26 PM
Thanks a lot... I was suspecting that but dreaded the possibility. Though the camera was bought in the USA, I am based in Ghana, West Africa...
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
09/26/2023: New firmware updates are available.
CN-E45-135mm T 2.4 L F - Version 1.4.0
EOS 1DX Mark III - Version 1.8.0
08/18/2023: Canon EOS R5 C training series is released.
07/31/2023: New firmware updates are available.
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
PowerShot Elph 360HS - Version 1.1.0.0
PowerShot SX420 IS - Version 1.1.0.0
PowerShot 620 HS - Version 1.1.0.0
PowerShot SX720 HS - Version 1.1.0.0
PowerShot G1X Mark III - Version 1.1.0.0
PowerShot G7X Mark II - Version 1.2.0.0
PowerShot G9X Mark II - Version 1.1.0.0
03/30/2023: New firmware updates are available.
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.