06-11-2016 03:30 PM
I have a Canon Eos Rebel T5 and can't do without my manual settings. If I switch the dial to Auto, Creative Auto, Macro, or any of the preset categories, the LCD displays just fine and the camera takes pictures as usual. However, if I move the dial to Manual or Aperture Priority, Shutter Priority or any of those settings, the LCD goes blank. When I hook it to the computer and use the EOS Utility, I can control the settings and it works fine. Is there anything I'm missing here? I have some insurance plan I bought, and this camera did this once before. I was in the rain but the camera didn't get that wet, I was keeping it pretty dry most of the time. Any suggestions?
06-11-2016 03:36 PM
duplicate post.
http://community.usa.canon.com/t5/EOS-Rebel/LCD-won-t-work-on-Manual-settings/m-p/176090#U176090
07/01/2024: New firmware updates are available.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.