07-08-2020 02:20 PM
Hello, I am wondering if anyone is using an external monitor with the Canon M50 and having trouble with the LCD Display going blank when connecting the Feelworld F6 Pro 5.7" or any monitor to HDMI. Does anyone know how to fix this? Am I able to use both screens at the same time? Thanks!
Solved! Go to Solution.
07-08-2020 02:21 PM
AFAIK, all Canons do this, they only have the video circuitry to drive one display: either the LCD or external.
07-08-2020 02:21 PM
AFAIK, all Canons do this, they only have the video circuitry to drive one display: either the LCD or external.
08-07-2020 10:25 AM
Hello KV,
Thank you for the reply. That answer helps me understand a lot.
12-15-2022 03:28 PM
This is not the case on the M50 Mk2. I'm using it with HDMI out to a Camlink. It will show the interface with live video on the swing out display for a minute or so after I half touch the shutter button, but then turn off. No matter whether the internal or external display is on, the clean HDMI is sent to the Camlink just fine.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.