02-27-2023 09:09 PM
I've just upped my game getting a DSLR to do stop motion with. I just bought the Canon Rebel T8i and cannot figure out how to get the camera to connect to my computer (so I can run it through the software, DragonFrame).
From what I read, once you plug your camera into the computer via USB it should pop up with Canon Utility, but it's not.
02-27-2023 09:23 PM
I don't usually use the Canon software. Image Capture runs fine for me. Try having image capture running when you plug in the camera and turn it on.
02-27-2023 09:49 PM
I opened image capture and it’s not picking up the camera either. I realized I was using the HDMI connection from camera to computer. I don’t know if the camera can only work with a USB connection?
02-27-2023 10:06 PM
Yes, it has to be USB. HDMI is pretty much only video output.
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 22.214.171.124
PowerShot SX420 IS - Version 126.96.36.199
PowerShot 620 HS - Version 188.8.131.52
PowerShot SX720 HS - Version 184.108.40.206
PowerShot G1X Mark III - Version 220.127.116.11
PowerShot G7X Mark II - Version 18.104.22.168
PowerShot G9X Mark II - Version 22.214.171.124
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.