11-27-2023 08:13 AM - last edited on 11-28-2023 08:40 AM by Danny
I have a new Cannon EOS R10 mirrorless. I am streaming directly via HDMI from the camera to an Elgato Cam link to OBS in my computer. Even though I disabled all power saving options below, during a livestream (and it was actually live on YouTube which was annoying) the video went black after about 20-25 min and I had to press a button to wake up the camera, and it happened again after 20-25 min.
What else can I do to prevent the camera from even stopping the video stream?
Solved! Go to Solution.
11-27-2023 08:50 AM
11-27-2023 08:33 AM
Many of the mid-range and high-end cameras are capable of “Clean HDMI” output. If the R10 has this feature, then I strongly suggest that you enable it.
I would also recommend restoring those power settings in your screenshot to their factory defaults.
11-27-2023 08:50 AM
11-27-2023 09:20 PM
Thank you for that. I think I got it. This wasn't visible before in the auto mode, I think I have to set it to movie mode for streaming right?
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.