07-10-2024 11:35 AM
Hello, I am trying to fire remote strobes with my R3, but it isn't working. I have Godox studio strobes and Phottix portable units and neither will fire. I am assuming there is some setting I need to change, but I can't seem to find it.
Thank you for the time! Joe
07-10-2024 12:31 PM
What do you have hooked up to the R3?
07-10-2024 02:50 PM
The wireless triggers for both the Godox strobes and Phottix.
07-11-2024 02:19 AM
Try changing the shutter mode from electronic to either 1st curtain electronic or mechanical
Also make sure that you have not disabled flash firing from the External Speedlite control menu. This stops all flash firing
07-10-2024 11:55 PM
I recently did an internship where at one point I was able to connect my mirrorless camera to strobe lights. I believe there's a hidden setting for the function of the camera that needs to be switched mechanical to operate with strobe lights( if I recall correctly).
07/01/2024: New firmware updates are available.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.