10-02-2020 08:50 PM
10-03-2020 02:18 AM
Hi SammyG,
Thanks for checking in with us!
As you suggested the camera won't make a sound when it finishes recording or when the card is full. This is so that camera will not be too disruptive during the recording.
When the camera stops recording, the indicator light by the viewfinder will stop blinking, so you might be able to set up a mirror so that you can monitor the indator while working on your drawing.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.