08-28-2016 09:07 PM
I'm running El Capitan 10.11.6 on my desktop Mac and cannot connect to either the EOS Utility or to Photos. I've tried re-installing the software and I get nowhere. My camera is a 1300D. Please be gentle, im new to the DSLR and digital photo world.
I look forward to your replies and thanks in advance.
08-28-2016 09:28 PM - edited 08-28-2016 09:29 PM
Does the camera show up in the Finder?
If you got to Image Finder what is it set to do?
If if you remove card from camera and plug into computer card reader what happens?
08-29-2016 01:10 AM
The camera does not show up in Finder and in Image Capture, it only recognises my Iphone. Also my ye olde desktop doesn not have an SD card slot.
Thanks for replying John.
08-29-2016 01:30 AM
Wait I found out what the issue is.... It dosnt like the Wifi function being enabled. Once i switched it off both Photo and the utility opened.
"Wi-Fi/NFC] is set to [Enable], the camera cannot be connected to a computer. Set [Wi-Fi/NFC] to [Disable], then reconnect the camera to a computer with an interface cable"
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.