02-21-2025
11:50 AM
- last edited on
02-21-2025
11:54 AM
by
SamanthaW
Hi I recently received a T6i camera and the screen has gone blank. No damage to it, no cracks nothing. Charged batteries and put in a new card. You can see in viewer that it appears to be working but no screen. I am not sure there is a way to reset with screen or if that needs to be done. Any help is appreciated!
02-21-2025 03:02 PM
Xnolagirl,
Does your camera have a Disp button?
Try pushing that and see if your screen comes back.
Steve Thomas
02-21-2025 04:09 PM
Did that - nothing
02-21-2025 03:24 PM
Or info.
02-21-2025 04:09 PM
Did that
02-21-2025 04:38 PM
Does the red access light blink when you turn the camera on?
Do you have an HDMI cable to see if there is HDMI output?
Has the Eyepiece slipped covering the display off sensor?
02-21-2025 05:19 PM
Light flashes red than goes off. I will check the eye piece and let you know!
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.