07-21-2016
01:28 PM
- last edited on
02-08-2024
08:49 AM
by
Danny
I just got this error on my T5. When I try to take a picture, it says: "Card cannot be accessed. Reinsert/change card or format card with camera." re-inserted but no luck.
So, I try to format the card from the camera menu settings, and it says "Cannot format. Change card."
I even tried re-formatting the cards on my computer, but still no luck. the card works on other cameras, so it's not the card.
I have used this card in the camera before and never had a problem, this just happened all of the sudden.
PLease help. My camera is only 4 months old.
12-07-2020 12:03 PM
Thank you, This was exactly the problem I was having with a new card....
06-19-2021 06:42 PM
I ran into this same problem today with my 70D. I've had the card read error intermittently for a few months and popping the card out then reinserting it always fixed it. My solution was easier. I cleaned the contacts on the card!
02-07-2024 10:52 AM
To people from the future, this was the hint I needed. The cards themselves were all fine, but I blew into the card port like an NES cartridge and it remedied my issue. Suddenly the camera could read my cards.
03/18/2025: New firmware updates are available.
EOS R5 Mark II - Version 1.0.3
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
09/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.